Epox-computer EP-3VWM Manuel d'utilisateur télécharger pdf (Page 40)

BIOS EP-3VWM

Page 4-18

4-6 PNP/PCI Configuration

The PNP/PCI configuration program is for the user to modify the PCI/ISA IRQ

signals when various PCI/ISA cards are inserted in the PCI or ISA slots.

WARNING: Conflicting IRQs may cause the system to not find certain devices.

Figure 7: PCI Configuration Setup

PNP OS Installed: Do you have a PNP OS installed on your system. The default

is No.

Ye s: Select if you are using a PNP OS.

No: Select if your OS does not support PNP.

Resources Controlled By: Who controlled the system PNP/PCI resources.

The default is Auto.

Manual: PNP Cards resources will be controlled manually. You can set which

IRQ-X and DMA-X are assigned to PCI/ISA PNP or Legacy ISA Cards.

Auto: If your ISA card and PCI card are all PNP cards, BIOS will assign the

interrupt resource automatically.

Reset Configuration Data: This setting allows you to clear ESCD data.

The default is Disabled

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 68 69

Pas de commentaire

Epox-computer EP-3VWM Manuel d'utilisateur Page 40